logo

Multi Cartridge Sanitary Filter

Sanitek Multi Fluid Sanitary Filter can meet requirements of medium & small flow rates.

The structure is designed and manufactured in accordance with the sanitary grade.

It’s no dead corner, meets ” GMP” standard, is easy to clean, drains thoroughly, and has no residual liquid.

For the application of some very harsh cleaning, the filter face plate is made of detachable, full-angle cleaning.

Multi Cartridge Sanitary Filter

Features and Quality

At the ultra-high level of polishing, the inner surface is polished to 0.3 um Ra. The outer surface reaches 0.4 um, the absolute hygienic level of polishing.

The vent valve can be quick-open, can be completely disassembled and has no dead corners for cleaning.

Small specification filter installation adjusting nut at the bottom of the Stabilizer blade, can adjust the height of the filter, easy to use.

Features and Quality

Material Specification

Filter Shell 304, 316L
Vent/Drain Valve 304, 316L
End Caps 304
O-ring EPDM, PTFE, Viton, Silicone

Connection

Connection of shell Tri-clamp
N1、N2 In-outlet Tri-clamp
N3 Pressure gauge (option) 1.5″ Tri-clamp
N4 Vent valve (option) 1/2″Tri-clamp/M6 Thread
N5 Drain valve (option) 1/2″Tri-clamp
Cartridges connection 222type, 226type(sanitation), DOE type(industrial-grade)

Dimension Parameters

3R(4R) 5R(6R) 7R(8R)
10” 20” 30” 40” 10” 20” 30” 40” 10” 20” 30” 40”
A: Total height 760 1010 1260 1510 780 1030 1280 1530 805 1055 1305 1555
B: The distance from the inlet to the center 160 160 200
C: Shell diameter Φ204 Φ235 Φ273
D: The height from
in-outlet N1, N2 to ground
200 200 200
In-outlet N1、N2 size 1.5" 2" 2.5"

Operating Conditions

Max Operating Pressure 0.6MPa、1.0MPa
Max Operating Temperature 150°C
Disinfect(sanitation) Online or steam sterilization: 121℃/30min

 

Surface Finish

Finish type Mechanical/  Electrolytic polishing/ Sandblasting
Polishing precision 0.3μm Inner surface Ra≤0.3μm
0.4μm Outside surface Ra≤0.4μm
Model Material No. of cartridge Cartridge filter
Sizes
Inlet/Outlet
connection
Gasket
materials
Surface Finished
MCSF=Multi Cartridge Sanitary Filter
MCSF-DA=Multi Cartridge Sanitary Filter
(Disassembled bottom)
E=SS 304
S=SS 316L
2R=2PCS
To
10R=10PCS
10=10inc
20=20inch
30=30inch
40=40inch
K=Tri-clamp B=Buna N
E=EPDM
S=Silicon
V=Viton
Interior
1=Polishing
Exterior
1= Polishing
Notice: Due to housing having variety in design, please contact Sanitek sales for more information

Features and Quality

Features and Quality

At the ultra-high level of polishing, the inner surface is polished to 0.3 um Ra. The outer surface reaches 0.4 um, the absolute hygienic level of polishing.

The vent valve can be quick-open, can be completely disassembled and has no dead corners for cleaning.

Small specification filter installation adjusting nut at the bottom of the Stabilizer blade, can adjust the height of the filter, easy to use.

Specification and Data

Material Specification

Filter Shell 304, 316L
Vent/Drain Valve 304, 316L
End Caps 304
O-ring EPDM, PTFE, Viton, Silicone

Connection

Connection of shell Tri-clamp
N1、N2 In-outlet Tri-clamp
N3 Pressure gauge (option) 1.5″ Tri-clamp
N4 Vent valve (option) 1/2″Tri-clamp/M6 Thread
N5 Drain valve (option) 1/2″Tri-clamp
Cartridges connection 222type, 226type(sanitation), DOE type(industrial-grade)

Dimension Parameters

3R(4R) 5R(6R) 7R(8R)
10” 20” 30” 40” 10” 20” 30” 40” 10” 20” 30” 40”
A: Total height 760 1010 1260 1510 780 1030 1280 1530 805 1055 1305 1555
B: The distance from the inlet to the center 160 160 200
C: Shell diameter Φ204 Φ235 Φ273
D: The height from
in-outlet N1, N2 to ground
200 200 200
In-outlet N1、N2 size 1.5" 2" 2.5"

Operating Conditions

Max Operating Pressure 0.6MPa、1.0MPa
Max Operating Temperature 150°C
Disinfect(sanitation) Online or steam sterilization: 121℃/30min

 

Surface Finish

Finish type Mechanical/  Electrolytic polishing/ Sandblasting
Polishing precision 0.3μm Inner surface Ra≤0.3μm
0.4μm Outside surface Ra≤0.4μm

Ordering Information

Model Material No. of cartridge Cartridge filter
Sizes
Inlet/Outlet
connection
Gasket
materials
Surface Finished
MCSF=Multi Cartridge Sanitary Filter
MCSF-DA=Multi Cartridge Sanitary Filter
(Disassembled bottom)
E=SS 304
S=SS 316L
2R=2PCS
To
10R=10PCS
10=10inc
20=20inch
30=30inch
40=40inch
K=Tri-clamp B=Buna N
E=EPDM
S=Silicon
V=Viton
Interior
1=Polishing
Exterior
1= Polishing
Notice: Due to housing having variety in design, please contact Sanitek sales for more information

Common questions about Sanitek

Common Questions about SanitekWhat is the difference between PES and PVDF filter membranes?

The main difference lies in their chemical compatibility and filtration properties. PES (polyethersulfone) membranes offer excellent compatibility with a broad range of solvents, acids, and bases. They are known for their low protein binding and high flow rates.

PVDF (polyvinylidene fluoride) membranes, on the other hand, have superior chemical resistance, making them suitable for aggressive solvents and strong acids. PVDF membranes also provide high protein binding capacity, making them ideal for protein-based applications. The choice between PES and PVDF depends on the specific requirements of the filtration process, including chemical compatibility and protein retention needs.

Common Questions about SanitekHow do you assure the quality of your products?

At Sanitek, we pay attention to the details of every link and strictly adhere to ISO 9001:2008 and ISO 13485:2005 standards to ensure the quality of our products.

In the raw material procurement phase, we work with reliable suppliers to ensure that the quality of raw materials meets our standard requirements.

In the production process, we strictly control the quality of each link to ensure that the manufacturing process of the product is stable and reliable. At the factory inspection stage of the final product, we carry out a comprehensive quality check to ensure that the product meets the customer’s requirements and specifications.

Common Questions about SanitekHow should I order? Who should I contact and how long does it take for material to arrive?

Contact us directly for full details or email us at sales@sanitekfilter.com. And we will get back to you as soon as possible.

Regarding the arrival time of materials, the specific delivery time may vary depending on the product inventory and shipping distance, please inquire about the specific delivery time when contacting the sales team. We will do our best to ensure that you receive the required materials in a timely manner.

Need Help?

You can find the right application or product using our Tool, or through our Chat Bot.

Let's help you find the right filter for
your critical filtration.

Talk to us

error: Content is protected !!
Open chat
Scan the code
Hello
Can we help you?