logo

SANIpure® PP2

SANIpure®PP2 Multi layers polypropylene filter designed with PP membrane graded pore size and high dirt holding capacity which eliminates high viscosity contaminants (including gels and agglomerates) and avoids filter surface jams.

The graded pore size distribution from coarse (upstream) to fine (downstream) removes particles gradually and extends the filter’s service life making it especially suited for high suspended particulates, colloids and viscous liquids.

SANIpure® PP2

Features and Quality

  • 5-7 layers of PP media with a graded pore size distribution enables additional particle loading and high dirt holding capacity.
  • Multi-layer polypropylene media offers excellent removal of contaminants, including gels and agglomerates.
  • Polypropylene construction ensures excellent chemical compatibility, enhancing versatility across various applications.
Features and Quality

Construction of Materials

Filtration Media Multi layers polypropylene media
Media Support Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Sealing Method Polypropylene
O-rings Thermal Bonding
O ring material Buna, Viton® (or FKM), EP, Silicone, FEP Encapsulated Silicone, FEP,Encapsulated Viton (or FKM)

Maximum Operating Parameters

Max Operating Pressure       
6.9 Bar (100 PSI) at 25℃
4.0 Bar (58 PSI) at 60℃
2.4 Bar (35 PSI ) at 80℃
Max Differential Pressure  
Forward             6.9 Bar (100 PSI) at 25 ℃
4.0 Bar (58 PSI) at 60 ℃
2.4 Bar (35 PSI) at 80 ℃
Reverse               3.0 Bar (44 PSI) at 25 ℃
1.0 Bar (15 PSI) at 80 ℃
Filtration Area 
0.3m2/10’’

Sanitization & Sterilization

Inline Steam 275 °F (135 °C), 30 min, 25+ cycles

 

*Cartridge Filters – For all elevated temperature procedures above, a stainless-steel support ring is required

Water Flow Characteristic

Water Flow Characteristic-PP2

602 51 0020 30 01 S A P
Filter Type
602=SANIpure® PP2
Fliter Configuration
51=Cartridge
Pore Size
0020=0.2um
0030=0.3um
0050=0.5um
0060=0.6um
0120=1.2um
0150=1.5um
0200=2.0um
0500=5.0um
Filter Size
30=5″
31=10″
33=20″
34=30″
35=40″
Connector
01=222Fin
02=222Flat
03=226Fin
04=226Flat
05=DOE
O-Ring
S=Silicone
E=EPDM
V=Viton
Sterilization
A=Autoclave
P=Pharmaceutical
grade

Features and Quality

Features and Quality
  • 5-7 layers of PP media with a graded pore size distribution enables additional particle loading and high dirt holding capacity.
  • Multi-layer polypropylene media offers excellent removal of contaminants, including gels and agglomerates.
  • Polypropylene construction ensures excellent chemical compatibility, enhancing versatility across various applications.

Specification and Data

Construction of Materials

Filtration Media Multi layers polypropylene media
Media Support Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Sealing Method Polypropylene
O-rings Thermal Bonding
O ring material Buna, Viton® (or FKM), EP, Silicone, FEP Encapsulated Silicone, FEP,Encapsulated Viton (or FKM)

Maximum Operating Parameters

Max Operating Pressure       
6.9 Bar (100 PSI) at 25℃
4.0 Bar (58 PSI) at 60℃
2.4 Bar (35 PSI ) at 80℃
Max Differential Pressure  
Forward             6.9 Bar (100 PSI) at 25 ℃
4.0 Bar (58 PSI) at 60 ℃
2.4 Bar (35 PSI) at 80 ℃
Reverse               3.0 Bar (44 PSI) at 25 ℃
1.0 Bar (15 PSI) at 80 ℃
Filtration Area 
0.3m2/10’’

Sanitization & Sterilization

Inline Steam 275 °F (135 °C), 30 min, 25+ cycles

 

*Cartridge Filters – For all elevated temperature procedures above, a stainless-steel support ring is required

Water Flow Characteristic

Water Flow Characteristic-PP2

Ordering Information

602 51 0020 30 01 S A P
Filter Type
602=SANIpure® PP2
Fliter Configuration
51=Cartridge
Pore Size
0020=0.2um
0030=0.3um
0050=0.5um
0060=0.6um
0120=1.2um
0150=1.5um
0200=2.0um
0500=5.0um
Filter Size
30=5″
31=10″
33=20″
34=30″
35=40″
Connector
01=222Fin
02=222Flat
03=226Fin
04=226Flat
05=DOE
O-Ring
S=Silicone
E=EPDM
V=Viton
Sterilization
A=Autoclave
P=Pharmaceutical
grade

Common questions about Sanitek

Common Questions about SanitekHow do you assure the quality of your products?

At Sanitek, we pay attention to the details of every link and strictly adhere to ISO 9001:2008 and ISO 13485:2005 standards to ensure the quality of our products.

In the raw material procurement phase, we work with reliable suppliers to ensure that the quality of raw materials meets our standard requirements.

In the production process, we strictly control the quality of each link to ensure that the manufacturing process of the product is stable and reliable. At the factory inspection stage of the final product, we carry out a comprehensive quality check to ensure that the product meets the customer’s requirements and specifications.

Common Questions about SanitekHow should I order? Who should I contact and how long does it take for material to arrive?

Contact us directly for full details or email us at sales@sanitekfilter.com. And we will get back to you as soon as possible.

Regarding the arrival time of materials, the specific delivery time may vary depending on the product inventory and shipping distance, please inquire about the specific delivery time when contacting the sales team. We will do our best to ensure that you receive the required materials in a timely manner.

Common Questions about SanitekCan cartridge filters be used for sterile gas applications?

Yes, cartridge filters have a highly effective microbial retention capacity to effectively remove microbial contaminants from the air, ensuring a sterile environment. In addition, Sanitek PTFE cartridge filters have good chemical and can be used under a variety of harsh process conditions. Therefore, for applications requiring sterile gases, Sanitek PTFE cartridge filters are a reliable choice.

Need Help?

You can find the right application or product using our Tool, or through our Chat Bot.

Let's help you find the right filter for
your critical filtration.

Talk to us

error: Content is protected !!