Materials of Construction
| Filter Material | Sintered titanium powder Center |
| Rod/housing/port | Sintered titanium |
| Powder Cap | Stainless steels 304 ( Titanium available) |
TCF® Cartridge Filter
Titanium Cartridge Filter for Pre-Filtration
TCF® is an effective solid-liquid separation cartridge made of more than 99.4% high-purity titanium structure.
Due to its broad chemical compatibility, TCF® can be used for the filtration of most liquids.
TCF® has very good solid-liquid separation effect on low-viscosity liquid with rigid particles.
The best results are achieved when used in combination with a titanium rod filter.
SANITEK TCF® Titanium Cartridge Filter is particularly suitable for decarbonization and filtration of liquids, chemical reagents, ozonated water filtration, steam filtration, etc.
Features and Quality
- Fully high-purity titanium structure
- No particles migration
- Resistance to corrosion, oxidation and extreme temperatures
- High porosity, high permeability, low-pressure drop
- Mean pore size, uniform structure, high separation efficiency
Effective Filtration Area
| Length | Filtration Area |
| 5inch (127mm) | 0.024m2 |
| 10inch (254mm) | 0.056m2 |
| 20inch (508mm) | 0.094m2 |
| 30inch (762mm) | 0.141m2 |
| 40inch(1016mm) | 0.188m2 |
Operation conditions
| Max temperature | ~280℃ |
| Max DP | 3.0 Bar |
Retention Rate
| Particle Range | 0.45um | 1um | 3um | 5um | 10um |
| ≥2um | 99.769% | 99.985% | 99.769% | 82.546% | 82.371% |
| ≥5um | 99.974% | 99.965% | 99.910% | 96.283% | 96.076% |
| ≥10um | 99.990% | 99.986% | 99.973% | 98.875% | 98.982% |
| ≥12um | 99.987% | 100.000% | 99.986% | 98.998% | 98.928% |
| ≥25um | 100.000% | 100.000% | 100.000% | 99.996% | 99.916% |
| ≥35um | 100.000% | 100.000% | 100.000% | 100.000% | 99.966% |
| ≥50um | 100.000% | 100.000% | 100.000% | 100.000% | 100.000% |
| 670 | 81 | 0045 | 50 | AP | S | A | P |
| Filter Type 670=TCF® |
Filter Configuration 71=Steel Cartridge |
Pore Size 0200=3um 0500=5um 1000=10um 2000=20um 5000=50um |
Filter Size 40=5″ 41=10″ 42=20″ 43=30″ 44=40″ |
Cartridge interface E2=Flat pressure E4=222 Flush type E7=226 Pointed type E8=1” Male NPT E9=1” Female NPT |
Seals S=Silicone E=EPDM V=Viton |
Sterilization A=Autoclave |
P=Pharmaceutical grade |
Features and Quality
- Fully high-purity titanium structure
- No particles migration
- Resistance to corrosion, oxidation and extreme temperatures
- High porosity, high permeability, low-pressure drop
- Mean pore size, uniform structure, high separation efficiency
Specification and Data
Materials of Construction
| Filter Material | Sintered titanium powder Center |
| Rod/housing/port | Sintered titanium |
| Powder Cap | Stainless steels 304 ( Titanium available) |
Effective Filtration Area
| Length | Filtration Area |
| 5inch (127mm) | 0.024m2 |
| 10inch (254mm) | 0.056m2 |
| 20inch (508mm) | 0.094m2 |
| 30inch (762mm) | 0.141m2 |
| 40inch(1016mm) | 0.188m2 |
Operation conditions
| Max temperature | ~280℃ |
| Max DP | 3.0 Bar |
Retention Rate
| Particle Range | 0.45um | 1um | 3um | 5um | 10um |
| ≥2um | 99.769% | 99.985% | 99.769% | 82.546% | 82.371% |
| ≥5um | 99.974% | 99.965% | 99.910% | 96.283% | 96.076% |
| ≥10um | 99.990% | 99.986% | 99.973% | 98.875% | 98.982% |
| ≥12um | 99.987% | 100.000% | 99.986% | 98.998% | 98.928% |
| ≥25um | 100.000% | 100.000% | 100.000% | 99.996% | 99.916% |
| ≥35um | 100.000% | 100.000% | 100.000% | 100.000% | 99.966% |
| ≥50um | 100.000% | 100.000% | 100.000% | 100.000% | 100.000% |
Ordering Information
| 670 | 81 | 0045 | 50 | AP | S | A | P |
| Filter Type 670=TCF® |
Filter Configuration 71=Steel Cartridge |
Pore Size 0200=3um 0500=5um 1000=10um 2000=20um 5000=50um |
Filter Size 40=5″ 41=10″ 42=20″ 43=30″ 44=40″ |
Cartridge interface E2=Flat pressure E4=222 Flush type E7=226 Pointed type E8=1” Male NPT E9=1” Female NPT |
Seals S=Silicone E=EPDM V=Viton |
Sterilization A=Autoclave |
P=Pharmaceutical grade |
Common questions about Sanitek
What is the difference between PES and PVDF filter membranes?
What is the difference between PES and PVDF filter membranes?The main difference lies in their chemical compatibility and filtration properties. PES (polyethersulfone) membranes offer excellent compatibility with a broad range of solvents, acids, and bases. They are known for their low protein binding and high flow rates.
PVDF (polyvinylidene fluoride) membranes, on the other hand, have superior chemical resistance, making them suitable for aggressive solvents and strong acids. PVDF membranes also provide high protein binding capacity, making them ideal for protein-based applications. The choice between PES and PVDF depends on the specific requirements of the filtration process, including chemical compatibility and protein retention needs.
How do you assure the quality of your products?
At Sanitek, we pay attention to the details of every link and strictly adhere to ISO 9001:2008 and ISO 13485:2005 standards to ensure the quality of our products.
In the raw material procurement phase, we work with reliable suppliers to ensure that the quality of raw materials meets our standard requirements.
In the production process, we strictly control the quality of each link to ensure that the manufacturing process of the product is stable and reliable. At the factory inspection stage of the final product, we carry out a comprehensive quality check to ensure that the product meets the customer’s requirements and specifications.
How should I order? Who should I contact and how long does it take for material to arrive?
Contact us directly for full details or email us at sales@sanitekfilter.com. And we will get back to you as soon as possible.
Regarding the arrival time of materials, the specific delivery time may vary depending on the product inventory and shipping distance, please inquire about the specific delivery time when contacting the sales team. We will do our best to ensure that you receive the required materials in a timely manner.
Need Help?
You can find the right application or product using our Tool, or through our Chat Bot.
