logo

SANIpore® TLF

Hydrophilic PTFE Membrane Filter Cartridges

SANIpore® TLF filter elements are composed of high-class absolute-rated hydrophilic polytetrafluoroethylene (PTFE) membrane and superior polypropylene components, which provide excellent chemical and heat tolerance. These filters are ideally suited for the sterile filtration of pharmaceutical liquids, aggressive acid/base and chemical liquids. And it has good tolerance to temperature and chemical

SANIpore® TLF

Features and Quality

  • Hydrophilic PTFE membrane which requires no pre-wetting
  • Excellent chemical compatibility especially for solvent-containing liquids
  • Minimal presservative binding in ophthalmic solutions
  • Clean membrane with very low gravimetric extractable
Features and Quality

Materials

Filter material Hydrophilic PTFE Membrane
Outer shell Polypropylene
End caps Polypropylene
O-Ring Silicone(optional Buna, Viton, or EPDM)

Retention Rates

0.22 um 0.45 um 1 um

Operating Parameters

Max. Allowable Differential Pressure 6.9 bar│100 psi 25°C
Max. Allowable Back Pressure 3.0 bar│44 psi 25°C

Sterilization

Autoclave 250°F (121°C), 30 min, 25+ cycles
SIP 250°F (121°C), 30 min, 30+ cycles
Gamma (Only Optional for Capsule Filter)

Water Flow Characteristic

Water Flow Characteristic-TLF

616 51 0020 30 01 S A P
Filter Type
616=SANIpore® TLF
Fliter Configuration
51=Cartridge
Pore Size
0020=0.22um
0045=0.45um
0100=1.0um
Filter Size
30=5″
31=10″
33=20″
34=30″
35=40″
Connector
01=222Fin
02=222Flat
03=226Fin
04=226Flat
05=DOE
O-Ring
S=Silicone
E=EPDM
V=Viton
Sterilization
A=Autoclave
P=Pharmaceutical
grade

Features and Quality

Features and Quality
  • Hydrophilic PTFE membrane which requires no pre-wetting
  • Excellent chemical compatibility especially for solvent-containing liquids
  • Minimal presservative binding in ophthalmic solutions
  • Clean membrane with very low gravimetric extractable

Specification and Data

Materials

Filter material Hydrophilic PTFE Membrane
Outer shell Polypropylene
End caps Polypropylene
O-Ring Silicone(optional Buna, Viton, or EPDM)

Retention Rates

0.22 um 0.45 um 1 um

Operating Parameters

Max. Allowable Differential Pressure 6.9 bar│100 psi 25°C
Max. Allowable Back Pressure 3.0 bar│44 psi 25°C

Sterilization

Autoclave 250°F (121°C), 30 min, 25+ cycles
SIP 250°F (121°C), 30 min, 30+ cycles
Gamma (Only Optional for Capsule Filter)

Water Flow Characteristic

Water Flow Characteristic-TLF

Ordering Information

616 51 0020 30 01 S A P
Filter Type
616=SANIpore® TLF
Fliter Configuration
51=Cartridge
Pore Size
0020=0.22um
0045=0.45um
0100=1.0um
Filter Size
30=5″
31=10″
33=20″
34=30″
35=40″
Connector
01=222Fin
02=222Flat
03=226Fin
04=226Flat
05=DOE
O-Ring
S=Silicone
E=EPDM
V=Viton
Sterilization
A=Autoclave
P=Pharmaceutical
grade

Common questions about Sanitek

Common Questions about SanitekCan cartridge filters be used for sterile gas applications?

Yes, cartridge filters have a highly effective microbial retention capacity to effectively remove microbial contaminants from the air, ensuring a sterile environment. In addition, Sanitek PTFE cartridge filters have good chemical and can be used under a variety of harsh process conditions. Therefore, for applications requiring sterile gases, Sanitek PTFE cartridge filters are a reliable choice.

Common Questions about SanitekFor the venting of distilled water tanks, I utilize 0.2 m PTFE cartridge filters.

When water is drawn from the tank, the filter is not allowed to draw in air and the tank will collapse due to the resulting vacuum.

The distilled water tank is kept at a high temperature of 80ºC, however, due to the sudden drop in the outside temperature, the water vapor in the distilled water tank encounters a hole inside the cartridge filter when it is discharged through the exhaust filter, and the water vapor condenses rapidly due to the low temperature.

This situation causes the pores of the cartridge filter to become clogged with condensate, which prevents the smooth flow of airflow. As the air flow is blocked, the vacuum effect gradually develops.

Common Questions about SanitekAre Sanitek PTFE cartridge filters available for steam sterilization?

Sanitek PTFE cartridge filter is a high-efficiency filter suitable for steam sterilization. They are rigorously tested and can be used for long periods of time at high temperatures, ensuring effective sterilization. These filters can be steam sterilized up to 100 times at 121°C with a cycle time of up to 30 minutes.

Whether inactivating microorganisms or filtering particulate matter, these filters effectively meet the needs and ensure a smooth sterilization process. Sanitek PTFE cartridge filters are your reliable partner in the steam sterilization process.

Need Help?

You can find the right application or product using our Tool, or through our Chat Bot.

Let's help you find the right filter for
your critical filtration.

Talk to us

error: Content is protected !!