Materials
| Filter material | Glass Fiber |
| Outer shell | Polypropylene |
| End caps | Polypropylene |
| O-Ring | Silicone (optional Buna, Viton, or EPDM) |
Polymempure® GFG
Glass Fiber Media for Prefiltration of Gases
The Polymempure® GFG Glass Fiber Membrane Pleated Cartridge Filters are constructed with fine glass microfiber membranes and excellent polypropylene support materials, which provide high filter retention capacity and filtration efficiency with a filtration rating range from 0.01 to 0.5 micron. They are highly recommended for the prefiltration of gases as an effective protection for the final sterilization-grade filters.
Features and Quality
- High Contaminant Capacity
- High Colloid, Grease And Particle
- Fine Particle Capture Capability
- Suitable For Prefiltration Of Gases
| Retention Rates | ||||||||
| 0.01 um | 0.3 um | 0.5 um | ||||||
Available Sizes|Filtration Area
| Cartridges | 30 | 5” | 0.18 m2 | 1.9 ft2 |
| 31 | 10″ | 0.35 m2 | 3.8 ft2 | |
| 32 | 20″ | 0.7 m2 | 7.5 ft2 | |
| 33 | 30″ | 1.1 m2 | 11.8 ft2 | |
| 34 | 40″ | 1.4 m2 | 15.1 ft2 |
Available Connectors
| Cartridges | 01 | 222Fin |
| 02 | 222Flat | |
| 03 | 226Fin | |
| 04 | 226Flat | |
| 05 | DOE |
Operating Parameters
| Max. Allowable Differential Pressure | 6.9 bar│100 psi 25°C |
| Max. Allowable Back Pressure | 3.0 bar│44 psi 25°C |
Sterilization
| Autoclave | 250°F (121°C), 30 min, 25+ cycles |
| SIP | 250°F (121°C), 30 min, 30+ cycles |
| 724 | A | 0001 | 30 | 01 | S | A | F |
| Filter Type 724=Polymempure® GFG |
Filter Configuration A=Cartridge |
Pore Size 0001=0.01um 0030=0.3um 0050=0.5um |
Filter Size 30=5″ 31=10″ 33=20″ 34=30″ 35=40″ |
Connector 01=222Fin 02=222Flat 03=226Fin 04=226Flat 05=DOE |
O-Ring S=Silicone E=EPDM V=Viton |
Sterilization A=Autoclave |
F=Food Grade |
Features and Quality
- High Contaminant Capacity
- High Colloid, Grease And Particle
- Fine Particle Capture Capability
- Suitable For Prefiltration Of Gases
Specification and Data
Materials
| Filter material | Glass Fiber |
| Outer shell | Polypropylene |
| End caps | Polypropylene |
| O-Ring | Silicone (optional Buna, Viton, or EPDM) |
| Retention Rates | ||||||||
| 0.01 um | 0.3 um | 0.5 um | ||||||
Available Sizes|Filtration Area
| Cartridges | 30 | 5” | 0.18 m2 | 1.9 ft2 |
| 31 | 10″ | 0.35 m2 | 3.8 ft2 | |
| 32 | 20″ | 0.7 m2 | 7.5 ft2 | |
| 33 | 30″ | 1.1 m2 | 11.8 ft2 | |
| 34 | 40″ | 1.4 m2 | 15.1 ft2 |
Available Connectors
| Cartridges | 01 | 222Fin |
| 02 | 222Flat | |
| 03 | 226Fin | |
| 04 | 226Flat | |
| 05 | DOE |
Operating Parameters
| Max. Allowable Differential Pressure | 6.9 bar│100 psi 25°C |
| Max. Allowable Back Pressure | 3.0 bar│44 psi 25°C |
Sterilization
| Autoclave | 250°F (121°C), 30 min, 25+ cycles |
| SIP | 250°F (121°C), 30 min, 30+ cycles |
Ordering Information
| 724 | A | 0001 | 30 | 01 | S | A | F |
| Filter Type 724=Polymempure® GFG |
Filter Configuration A=Cartridge |
Pore Size 0001=0.01um 0030=0.3um 0050=0.5um |
Filter Size 30=5″ 31=10″ 33=20″ 34=30″ 35=40″ |
Connector 01=222Fin 02=222Flat 03=226Fin 04=226Flat 05=DOE |
O-Ring S=Silicone E=EPDM V=Viton |
Sterilization A=Autoclave |
F=Food Grade |
Common questions about Sanitek
What is the difference between PES and PVDF filter membranes?
What is the difference between PES and PVDF filter membranes?The main difference lies in their chemical compatibility and filtration properties. PES (polyethersulfone) membranes offer excellent compatibility with a broad range of solvents, acids, and bases. They are known for their low protein binding and high flow rates.
PVDF (polyvinylidene fluoride) membranes, on the other hand, have superior chemical resistance, making them suitable for aggressive solvents and strong acids. PVDF membranes also provide high protein binding capacity, making them ideal for protein-based applications. The choice between PES and PVDF depends on the specific requirements of the filtration process, including chemical compatibility and protein retention needs.
How do you assure the quality of your products?
At Sanitek, we pay attention to the details of every link and strictly adhere to ISO 9001:2008 and ISO 13485:2005 standards to ensure the quality of our products.
In the raw material procurement phase, we work with reliable suppliers to ensure that the quality of raw materials meets our standard requirements.
In the production process, we strictly control the quality of each link to ensure that the manufacturing process of the product is stable and reliable. At the factory inspection stage of the final product, we carry out a comprehensive quality check to ensure that the product meets the customer’s requirements and specifications.
How should I order? Who should I contact and how long does it take for material to arrive?
Contact us directly for full details or email us at sales@sanitekfilter.com. And we will get back to you as soon as possible.
Regarding the arrival time of materials, the specific delivery time may vary depending on the product inventory and shipping distance, please inquire about the specific delivery time when contacting the sales team. We will do our best to ensure that you receive the required materials in a timely manner.
Need Help?
You can find the right application or product using our Tool, or through our Chat Bot.
