Construction of Materials
| Filtration Media | PTFE |
| Media Support | PFA |
| End Caps | PFA |
| Center Core | PFA |
| Outer Support Cage Sealing Method | PFA |
| O-rings | Thermal Bonding |
| O ring material | PTFE/FEP,Encapsulated Viton (or FKM) |
SANIpore® PFA
PTFE Membrane and PFA Cage, Core, Caps and Supports
SANIpore® PFA filter cartridges are composed of an expanded Polytetrafluoroethylene(PTFE) membrane and PFA cage, core, caps and support. Superior pleated PTFE membrane filters with PFA support for chemical inertness across a broad range of wafer bumping and microelectronics process chemical applications.
High-purity application filters manufactured in a clean room environment. Fast rinse-up time as filters have been pre-flushed with Ultrapure DI water (18.2 Megaohm-cm, TOC less than 10ppb).
Features and Quality
- Semiconductor wet etch, clean, stripper chemical filtration
- Wafer bumping wet etch, clean, stripper chemical filtration
- Solvent filtration
- Strong acid and base solution at room temperature for semiconductor manufacturing
- Aggressive chemical processes in the photovoltaic and data storage industrie
Maximum Operating Parameters
| Max Operating Temperature | |
| 170℃ | |
| Max Differential Pressure | |
| Forward | 4.0 Bar at 50 ℃ |
| 3.0 Bar at 110℃ | |
| 1.5 Bar at 170 ℃ | |
| Filtration Area | |
| 0.8m2/10inch | |
| Integrity Testing Data | |
| Bubble Point: ≥0.11MPA（60%/40%, IPA/water） | |
| Water Instrusion Test: ≤0.38ml/min/10’’@0.25MPA | |
Cartridge Integrity Test Specifications
| Bubble Point | |
| BP≥0.11 Mpa (60%/40% IPA/Water) (0.22um) | |
| Diffusion Flow | |
| DF≤16ml/min/10’’@0.27 MPA, 0.22um | |
| Water Instrusion Test | |
| WFI: ≤0.38ml/min/10’’ cartridge @ 0.25MPA, 0.22um | |
| Filtration Area | 0.68m2/10’’ |
Sanitization & Sterilization
| Inline Steam | 275 °F (135 °C), 30 min, 25+ cycles |
| Autoclave | 250 °F (121 °C), 30 min, 25+ cycles |
*Cartridge Filters – For all elevated temperature procedures above, a stainless-steel support ring is required
| 617 | 51 | 0005 | 30 | 01 | S | A | P |
| Filter Type 617=SANIpore® PFA |
Filter Configuration 51=Cartridge |
Pore Size 0005=0.05um 0010=0.1um 0020=0.2um 0045=0.45um 0100=1.0um 0500=5.0um 1000=10um |
Filter Size 30=5″ 31=10″ 33=20″ 34=30″ 35=40″ |
Connector 01=222Fin 02=222Flat 03=226Fin 04=226Flat 05=DOE |
O-Ring S=Silicone E=EPDM V=Viton |
Sterilization A=Autoclave |
P=Pharmaceutical grade |
Features and Quality
- Semiconductor wet etch, clean, stripper chemical filtration
- Wafer bumping wet etch, clean, stripper chemical filtration
- Solvent filtration
- Strong acid and base solution at room temperature for semiconductor manufacturing
- Aggressive chemical processes in the photovoltaic and data storage industrie
Specification and Data
Construction of Materials
| Filtration Media | PTFE |
| Media Support | PFA |
| End Caps | PFA |
| Center Core | PFA |
| Outer Support Cage Sealing Method | PFA |
| O-rings | Thermal Bonding |
| O ring material | PTFE/FEP,Encapsulated Viton (or FKM) |
Maximum Operating Parameters
| Max Operating Temperature | |
| 170℃ | |
| Max Differential Pressure | |
| Forward | 4.0 Bar at 50 ℃ |
| 3.0 Bar at 110℃ | |
| 1.5 Bar at 170 ℃ | |
| Filtration Area | |
| 0.8m2/10inch | |
| Integrity Testing Data | |
| Bubble Point: ≥0.11MPA（60%/40%, IPA/water） | |
| Water Instrusion Test: ≤0.38ml/min/10’’@0.25MPA | |
Cartridge Integrity Test Specifications
| Bubble Point | |
| BP≥0.11 Mpa (60%/40% IPA/Water) (0.22um) | |
| Diffusion Flow | |
| DF≤16ml/min/10’’@0.27 MPA, 0.22um | |
| Water Instrusion Test | |
| WFI: ≤0.38ml/min/10’’ cartridge @ 0.25MPA, 0.22um | |
| Filtration Area | 0.68m2/10’’ |
Sanitization & Sterilization
| Inline Steam | 275 °F (135 °C), 30 min, 25+ cycles |
| Autoclave | 250 °F (121 °C), 30 min, 25+ cycles |
*Cartridge Filters – For all elevated temperature procedures above, a stainless-steel support ring is required
Ordering Information
| 617 | 51 | 0005 | 30 | 01 | S | A | P |
| Filter Type 617=SANIpore® PFA |
Filter Configuration 51=Cartridge |
Pore Size 0005=0.05um 0010=0.1um 0020=0.2um 0045=0.45um 0100=1.0um 0500=5.0um 1000=10um |
Filter Size 30=5″ 31=10″ 33=20″ 34=30″ 35=40″ |
Connector 01=222Fin 02=222Flat 03=226Fin 04=226Flat 05=DOE |
O-Ring S=Silicone E=EPDM V=Viton |
Sterilization A=Autoclave |
P=Pharmaceutical grade |
Common questions about Sanitek
What is the difference between PES and PVDF filter membranes?
What is the difference between PES and PVDF filter membranes?The main difference lies in their chemical compatibility and filtration properties. PES (polyethersulfone) membranes offer excellent compatibility with a broad range of solvents, acids, and bases. They are known for their low protein binding and high flow rates.
PVDF (polyvinylidene fluoride) membranes, on the other hand, have superior chemical resistance, making them suitable for aggressive solvents and strong acids. PVDF membranes also provide high protein binding capacity, making them ideal for protein-based applications. The choice between PES and PVDF depends on the specific requirements of the filtration process, including chemical compatibility and protein retention needs.
How do you assure the quality of your products?
At Sanitek, we pay attention to the details of every link and strictly adhere to ISO 9001:2008 and ISO 13485:2005 standards to ensure the quality of our products.
In the raw material procurement phase, we work with reliable suppliers to ensure that the quality of raw materials meets our standard requirements.
In the production process, we strictly control the quality of each link to ensure that the manufacturing process of the product is stable and reliable. At the factory inspection stage of the final product, we carry out a comprehensive quality check to ensure that the product meets the customer’s requirements and specifications.
How should I order? Who should I contact and how long does it take for material to arrive?
Contact us directly for full details or email us at sales@sanitekfilter.com. And we will get back to you as soon as possible.
Regarding the arrival time of materials, the specific delivery time may vary depending on the product inventory and shipping distance, please inquire about the specific delivery time when contacting the sales team. We will do our best to ensure that you receive the required materials in a timely manner.
Need Help?
You can find the right application or product using our Tool, or through our Chat Bot.
