logo

SANIpure® GFG

Glass Fiber Media for Prefiltration of Gases

The SANIpure® GFG Glass Fiber Membrane Pleated Cartridge Filters are constructed with fine glass microfiber membranes and excellent polypropylene support materials, which provide high filter retention capacity and filtration efficiency with a filtration rating range from 0.01 to 0.5 micron. They are highly recommended for the prefiltration of gases as an effective protection for the final sterilization-grade filters.

SANIpure® GFG

Features and Quality

  • High dirt holding capacity and longer service life
  • High flow rates with low pressure drops
  • Glass Fiber media ensures high flow rates and excellent filtration efficiency.
Features and Quality

Construction of Materials

Filtration Media Fine glass micronfiber
Media Support Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Sealing Method Polypropylene
O-rings Thermal Bonding
O ring material Buna, Viton® (or FKM), EP, Silicone, FEP Encapsulated Silicone, FEP,Encapsulated Viton (or FKM)

Maximum Operating Parameters

Max Operating Pressure       
6.9 Bar (100 PSI) at 25℃
4.0 Bar (58 PSI) at 60℃
2.4 Bar (35 PSI ) at 80℃
Max Differential Pressure  
Forward             6.9 Bar (100 PSI) at 25 ℃
4.0 Bar (58 PSI) at 60 ℃
2.4 Bar (35 PSI) at 80 ℃
Reverse               3.0 Bar (44 PSI) at 25 ℃
1.0 Bar (15 PSI) at 80 ℃
Filtration Area 
0.3m2/10’’

Sanitization & Sterilization

Inline Steam 275 °F (135 °C), 30 min, 25+ cycles

 

*Cartridge Filters – For all elevated temperature procedures above, a stainless-steel support ring is required

605 51 0001 30 01 S A P
Filter Type
605=SANIpure® GFG
Fliter Configuration
51=Cartridge
Pore Size
0001=0.01um
0030=0.3um
0050=0.5um
Filter Size
30=5″
31=10″
33=20″
34=30″
35=40″
Connector
01=222Fin
02=222Flat
03=226Fin
04=226Flat
05=DOE
O-Ring
S=Silicone
E=EPDM
V=Viton
Sterilization
A=Autoclave
P=Pharmaceutical
grade

Features and Quality

Features and Quality
  • High dirt holding capacity and longer service life
  • High flow rates with low pressure drops
  • Glass Fiber media ensures high flow rates and excellent filtration efficiency.

Specification and Data

Construction of Materials

Filtration Media Fine glass micronfiber
Media Support Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Sealing Method Polypropylene
O-rings Thermal Bonding
O ring material Buna, Viton® (or FKM), EP, Silicone, FEP Encapsulated Silicone, FEP,Encapsulated Viton (or FKM)

Maximum Operating Parameters

Max Operating Pressure       
6.9 Bar (100 PSI) at 25℃
4.0 Bar (58 PSI) at 60℃
2.4 Bar (35 PSI ) at 80℃
Max Differential Pressure  
Forward             6.9 Bar (100 PSI) at 25 ℃
4.0 Bar (58 PSI) at 60 ℃
2.4 Bar (35 PSI) at 80 ℃
Reverse               3.0 Bar (44 PSI) at 25 ℃
1.0 Bar (15 PSI) at 80 ℃
Filtration Area 
0.3m2/10’’

Sanitization & Sterilization

Inline Steam 275 °F (135 °C), 30 min, 25+ cycles

 

*Cartridge Filters – For all elevated temperature procedures above, a stainless-steel support ring is required

Ordering Information

605 51 0001 30 01 S A P
Filter Type
605=SANIpure® GFG
Fliter Configuration
51=Cartridge
Pore Size
0001=0.01um
0030=0.3um
0050=0.5um
Filter Size
30=5″
31=10″
33=20″
34=30″
35=40″
Connector
01=222Fin
02=222Flat
03=226Fin
04=226Flat
05=DOE
O-Ring
S=Silicone
E=EPDM
V=Viton
Sterilization
A=Autoclave
P=Pharmaceutical
grade

Common questions about Sanitek

Common Questions about SanitekHow do you assure the quality of your products?

At Sanitek, we pay attention to the details of every link and strictly adhere to ISO 9001:2008 and ISO 13485:2005 standards to ensure the quality of our products.

In the raw material procurement phase, we work with reliable suppliers to ensure that the quality of raw materials meets our standard requirements.

In the production process, we strictly control the quality of each link to ensure that the manufacturing process of the product is stable and reliable. At the factory inspection stage of the final product, we carry out a comprehensive quality check to ensure that the product meets the customer’s requirements and specifications.

Common Questions about SanitekHow should I order? Who should I contact and how long does it take for material to arrive?

Contact us directly for full details or email us at sales@sanitekfilter.com. And we will get back to you as soon as possible.

Regarding the arrival time of materials, the specific delivery time may vary depending on the product inventory and shipping distance, please inquire about the specific delivery time when contacting the sales team. We will do our best to ensure that you receive the required materials in a timely manner.

Common Questions about SanitekCan cartridge filters be used for sterile gas applications?

Yes, cartridge filters have a highly effective microbial retention capacity to effectively remove microbial contaminants from the air, ensuring a sterile environment. In addition, Sanitek PTFE cartridge filters have good chemical and can be used under a variety of harsh process conditions. Therefore, for applications requiring sterile gases, Sanitek PTFE cartridge filters are a reliable choice.

Need Help?

You can find the right application or product using our Tool, or through our Chat Bot.

Let's help you find the right filter for
your critical filtration.

Talk to us

error: Content is protected !!