Construction of Materials
| Filtration Media | Hydrophilic/Hydrophibic PTFE membrane |
| Media Support | ECTFE |
| End Caps | PVDF |
| Center Core | PVDF |
| Outer Support Cage Sealing Method | PVDF |
| O-rings | Thermal Bonding |
| O ring material | PTFE/FEP Encapsulated Viton |
TPVF filter cartridges
TPVF filter cartridges are composed of an expanded hydrophilic and hydrophibic PTFE membrane, ECTFE support and PVDF cage and core making it suitable to use in strong and solvent filtration.
Hydrophilic PTFE membrane mainly designed for water based filtration conditions,or strong chemical acid and solvent filtration.
Features and Quality
- 100% all Flucropolymer construction
- Absolute rated in all ratings except 0.22um.
- 0.22um rating retention efficiency is up to 99.9999%;
- High filtration performance including high flow rates and low pressure drop
- Available in both hydrophilic and hydrophibic PTFE membrane
Maximum Operating Parameters
| Max Operating Temperature | |
| 96℃ | |
| Max Differential Pressure | |
| Forward | 5.0 Bar at 21℃ |
| 3.0 Bar at 80℃ | |
Cartridge Integrity Test Specifications
| Filtration Area | |
| 0.98m2/10inch | |
| Integrity Testing Data | |
| Hydrophibic PTFE membrane | Bubble Point: ≥0.1MPA（60%/40%, IPA/water）
Diffusion FLow: ≤28ml/min/10’’@80Kpa (60%/40%, IPA/water) |
| Water Instrusion Test: 0.53ml/min/10’’@0.25MPA | |
| HYdrophilic PTFE membrane | Bubble Point: ≥0.32MPA（water）
≥0.1MPA（60%/40%, IPA/water） |
| Diffusion FLow: ≤28ml/min/10’’@80Kpa (60%/40%, IPA/water) | |
| Notice: Not recommended for inline steam sterilization and Autoclaving | |
Flow Rate & Pressure Drop
| TPVF | Filtration Media | Removal Ratings | Length | O-Ring/Gasket Code | End Cap Code/Connection |
| B=Hydrophibic
L=Hydrophilic |
020=0.2um
045=0.45um 300=3.0um 500=5.0um |
005=5inch
010=10inch 020=20inch 030=30inch 040=40inch |
T=PTFE
F=FEP encapsulated Viton |
DOE=Double Open
BTC=222 Oring/Flat SC=226 Oring/Flat SF=226 FIN BTF=222 FIN |
|
| Notice: Due to filter has variety in design, please contact with SANITEK sales for more information | |||||
Features and Quality
- 100% all Flucropolymer construction
- Absolute rated in all ratings except 0.22um.
- 0.22um rating retention efficiency is up to 99.9999%;
- High filtration performance including high flow rates and low pressure drop
- Available in both hydrophilic and hydrophibic PTFE membrane
Specification and Data
Construction of Materials
| Filtration Media | Hydrophilic/Hydrophibic PTFE membrane |
| Media Support | ECTFE |
| End Caps | PVDF |
| Center Core | PVDF |
| Outer Support Cage Sealing Method | PVDF |
| O-rings | Thermal Bonding |
| O ring material | PTFE/FEP Encapsulated Viton |
Maximum Operating Parameters
| Max Operating Temperature | |
| 96℃ | |
| Max Differential Pressure | |
| Forward | 5.0 Bar at 21℃ |
| 3.0 Bar at 80℃ | |
Cartridge Integrity Test Specifications
| Filtration Area | |
| 0.98m2/10inch | |
| Integrity Testing Data | |
| Hydrophibic PTFE membrane | Bubble Point: ≥0.1MPA（60%/40%, IPA/water）
Diffusion FLow: ≤28ml/min/10’’@80Kpa (60%/40%, IPA/water) |
| Water Instrusion Test: 0.53ml/min/10’’@0.25MPA | |
| HYdrophilic PTFE membrane | Bubble Point: ≥0.32MPA（water）
≥0.1MPA（60%/40%, IPA/water） |
| Diffusion FLow: ≤28ml/min/10’’@80Kpa (60%/40%, IPA/water) | |
| Notice: Not recommended for inline steam sterilization and Autoclaving | |
Flow Rate & Pressure Drop
Ordering Information
| TPVF | Filtration Media | Removal Ratings | Length | O-Ring/Gasket Code | End Cap Code/Connection |
| B=Hydrophibic
L=Hydrophilic |
020=0.2um
045=0.45um 300=3.0um 500=5.0um |
005=5inch
010=10inch 020=20inch 030=30inch 040=40inch |
T=PTFE
F=FEP encapsulated Viton |
DOE=Double Open
BTC=222 Oring/Flat SC=226 Oring/Flat SF=226 FIN BTF=222 FIN |
|
| Notice: Due to filter has variety in design, please contact with SANITEK sales for more information | |||||
Common questions about Sanitek
What is the difference between PES and PVDF filter membranes?
What is the difference between PES and PVDF filter membranes?The main difference lies in their chemical compatibility and filtration properties. PES (polyethersulfone) membranes offer excellent compatibility with a broad range of solvents, acids, and bases. They are known for their low protein binding and high flow rates.
PVDF (polyvinylidene fluoride) membranes, on the other hand, have superior chemical resistance, making them suitable for aggressive solvents and strong acids. PVDF membranes also provide high protein binding capacity, making them ideal for protein-based applications. The choice between PES and PVDF depends on the specific requirements of the filtration process, including chemical compatibility and protein retention needs.
How do you assure the quality of your products?
At Sanitek, we pay attention to the details of every link and strictly adhere to ISO 9001:2008 and ISO 13485:2005 standards to ensure the quality of our products.
In the raw material procurement phase, we work with reliable suppliers to ensure that the quality of raw materials meets our standard requirements.
In the production process, we strictly control the quality of each link to ensure that the manufacturing process of the product is stable and reliable. At the factory inspection stage of the final product, we carry out a comprehensive quality check to ensure that the product meets the customer’s requirements and specifications.
How should I order? Who should I contact and how long does it take for material to arrive?
Contact us directly for full details or email us at sales@sanitekfilter.com. And we will get back to you as soon as possible.
Regarding the arrival time of materials, the specific delivery time may vary depending on the product inventory and shipping distance, please inquire about the specific delivery time when contacting the sales team. We will do our best to ensure that you receive the required materials in a timely manner.
Need Help?
You can find the right application or product using our Tool, or through our Chat Bot.
